Decks setup…

Very exciting developments for my future career as a superstar DJ…

The living room is nearly done so I finally started to setup all the mixing equipment and build the table for it. We had ordered a standard piece of wooden worktop from Ikea and 4 white metal legs and I cut the worktop to the right size and screwed on the legs.

This slideshow requires JavaScript.

Lots of consideration went into the table size and it’s worked out that there will be 1.5cms of space on each side of the table, to the edge of the recently built coat storage area in the hallway. The idea there is to build a protective cover for the equipment for when they’re not being used, which will have two sides and a front, which can be slid over the whole table. It will also mean less visual clutter. This will be 1 cm thick, which will take the total width up to the sides of the hallway cupboard sides.

So, I cut the worktop with the new Bosch jigsaw (which is awesome), then fixed the legs on, after a cycle to B&Q to get a new pilot hole drill bit, after a couple of the screws broke!

I also screwed off the plastic covers from the sides of each turntable, which meant I gained an extra 4 cms width. The covers now don’t have the hinges on but I won’t be using these when the full table cover has been built. The mixer and decks all line up and are almost exactly the same heights. It looks awesome and a lot less visually intrusive than I thought it would be.

I’ve still got to get the records out from the old bathroom and into the boxes, which will all go under the table. There was a whole palava about the amplifier and where that would go, how much space it would take up etc etc. It turns out, the speakers i’ve bought are self-powered and don’t even need an amp! Brilliant. So, now there is no need to use my amp and therefore it won’t take up any space under the table (or on it). One less thing to hook up. The only thing was the connection between the speakers and the mixer – I didn’t have the right cables as my old setup had cables designed to go into the amp from un-powered speakers. Not a problem as we’ve just ordered two cables from tinternet which should be here on Wednesday.

out

Advertisements

2 thoughts on “Decks setup…

    • The ‘missing’ cables have arrived and I just need a travel plug to fit the two pin mixer plug into! I’m sure i’ll be able to use them this side of Christmas!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s