New controlled crossing tactile metal pavement studs. These are designed to contrast with the paving and alert partially sighted pedestrians that there is a crossing. A hole for each stud is drilled then studs are glued into the Forest of Dean natural sandstone paving.
An eventful half day (or maybe just a bit more) spent collecting and fitting the new fireplace hearth stone.
Claire’s parents helped us out a lot here; Pearl by looking after the boys while Claire, Neil and I first went to the dump to drop off most of the stuff from the side of the house, then to the quarry to pick up the stone. The use of their Ford Galaxy was very helpful and the stone weighed a fair bit!
It’s a lovely colour and very thick, but we measured it just a bit too tightly, meaning we had to hack off some of the fire screed around the fireplace base. It slid in ok after that, and Neil put down cement for it to bed down on.
There was a fair bit of back and forth before it went in, and the levelling took a while! In the end, we got it level in relation to the floor and almost totally flat across it. we just have to let it dry for a few days then remove the paper and tape around the edges. Then the stove can go back in and be cemented in around the pipe.